At One Punch, we always strive to provide the best experience for our customers, not only when setting up the machine but also when it's time to remove or reposition it.
After getting many questions about it, in this post, we'll guide you through the simple and safe steps of removing the One Punch music boxing machine from the wall without damaging your wall or equipment.
Why It’s Important to Remove the One Punch Music Boxing Machine Carefully
The One Punch music boxing machine is secured to the wall using Velcro, a convenient and great solution that ensures stability during your workouts. However, removing the machine could potentially damage your wall or leave marks, which is why it's important to follow a slow, careful process. By taking your time and using the proper techniques, you can avoid any damage and keep your wall looking just like it did before you installed the machine.
The 4 Steps Process & Instructions for Safe Removal
Here are the steps you should follow to safely remove the One Punch music boxing machine
1. Prepare Your Space
Before you start removing the machine, make sure to clear the area around it. This will give you enough space to move freely and prevent any accidents. It’s also a good idea to have a hair dryer handy if you have one, as this will help with loosening the Velcro if necessary.
2. Gently Peel the Velcro
The One Punch music boxing machine is held in place with strong Velcro strips. To begin the removal process, start peeling the Velcro slowly from one corner. It's crucial to do this step gradually—if you pull too quickly, there’s a risk of damaging the wall or leaving adhesive residue behind.
3. Use a Hair Dryer for Easier Removal
If you're finding it difficult to peel off the Velcro or if it feels like it's stuck too firmly to the wall, don’t worry! Simply take out a hair dryer and apply gentle heat to the Velcro strips. Hold the hair dryer about 6 to 12 inches away from the Velcro and heat the area for about 30 seconds to 1 minute. This will soften the velcro, making it much easier to remove without pulling off any paint or damaging the wall.
4. Clean Any Residue
After removing the machine, inspect the wall. If you notice any sticky patches, you can use a mild cleaning solution or rubbing alcohol on a cloth to gently clean the area. Be sure to use a soft cloth to avoid scratching the wall.
What To Avoid
- Do not yank or pull the machine off the wall. Fast, forceful removal can damage both the Velcro and the wall.
- Avoid using excessive heat. While a hair dryer is a great tool for loosening adhesive, too much heat can warp or weaken the Velcro strips. Use moderate heat at a safe distance to get the best results.
With these simple steps, you can safely remove the One Punch boxing machine from the wall without causing any damage. By taking your time, peeling the Velcro slowly, and using a hair dryer to ease the process, you’ll have your wall looking as good as new in no time.
you can see a visual explanation here: https://youtube.com/shorts/PI3rHkPuJZY?si=5CW_7XBjJ87nHu_z
If you have any other questions or concerns, feel free to reach out to our support team. We're always happy to help!